 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 4.0x4.0mm RIGHT ANGLE SURFACE MOUNT LED LAMP PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AA4040PBC/Z BLUE Features SINGLE COLOR. SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER PROCESS. AVAILABLE ON TAPE AND REEL. IDEAL FOR BACKLIGHTING. PACKAGE : 500PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 4. RoHS COMPLIANT. Description The Blue source color devices are made with InGaN Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH2389 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: JUN/22/2007 DRAWN: W.J.ZHU PAGE: 1 OF 6 ERP: 1201003011 Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might leads to damage and premature failure of the LED. 1. Handle the component along the side surfaces by using forceps or appropriate tools. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. SPEC NO: DSAH2389 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: JUN/22/2007 DRAWN: W.J.ZHU PAGE: 2 OF 6 ERP: 1201003011 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. AA4040PBC/Z BLUE (InGaN) WATER CLEAR 110 Typ. 280 Viewing Angle [1] 21/2 120 Notes: 1.1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity / Luminous Flux: +/-15% Electrical / Optical Characteristics at TA=25C Symbol peak D [1] 1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Blue Blue Blue Blue Blue Blue Device Typ. 458 465 22 110 3.2 3.7 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating / Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Blue 111 30 100 5 -40C To +85C Units mW mA mA V SPEC NO: DSAH2389 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: JUN/22/2007 DRAWN: W.J.ZHU PAGE: 3 OF 6 ERP: 1201003011 Blue AA4040PBC/Z SPEC NO: DSAH2389 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: JUN/22/2007 DRAWN: W.J.ZHU PAGE: 4 OF 6 ERP: 1201003011 AA4040PBC/Z Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Tape Specifications (Units : mm) SPEC NO: DSAH2389 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: JUN/22/2007 DRAWN: W.J.ZHU PAGE: 5 OF 6 ERP: 1201003011 PACKING & LABEL SPECIFICATIONS AA4040PBC/Z SPEC NO: DSAH2389 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: JUN/22/2007 DRAWN: W.J.ZHU PAGE: 6 OF 6 ERP: 1201003011 |
Price & Availability of AA4040PBC-Z
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |